The Riversway Cage Front Seed hoppers attach directly to your cage fronts,
no cutting of the cage is required as the base of the Hopper simply slots
into the tube through the cage front wires. The design allows seed to freely
flow through your wire fronts into the base, thus allowing your birds access
to their feed. No screws or fixings are required.
The
Hopper base is designed to have the vertical bars slotted into position as
pictured. Exact position depends on your cage front size (12.7mm (1/2 inch)
or 16mm (5/8 inch)). It may be necessary to have the base located with the
middle bar placed directly in the centre gap.
The
central lugs at the bottom of the Hopper base are designed to slide snuggly
into the Hopper tube base as shown. (hopper assembly shown without cage
front for illustration purposes in this picture)
Cage
Front Seed Hopper shown in situ. As demonstrated, NO cutting of the bars
is required and there is ample room to allow the seed to flow freely. Please
note that the Hoppers are designed to sit on a horizontal bar to support
the weight.
