Riversway Products

Cuttle Clasp. Specifically designed to adjust to all sizes of cuttlefish in an upright position. A high quality product superbly manufactured to obtain optimum strength and rigidity when in use and is available in the Riversway colour range. Attachment to 16mm (5/8 inch) punch bar only. only £1.10 each! attach product mid height where cage fronts give, then place cuttle insitu and push clasp towards the horizontal bar. this will tighten the product to the cage front.

Multi-fit Aviary Perch Support. Another product that is unique to Riversway. Multi-fit perch supports are designed to fit both wire mesh and cage fronts from 1/2" to 1" and are very simple to use, just screw the outer section to the perch support (as seen in picture) and you have a very secure fitting. A must for every aviary with wire mesh! only £1.10 each! Square perch only

Twinpot Feeding Station. The twin feeding dishes are housed in a fixed carrier, and offer fanciers greater variation and flexibility in the feeding of special foods. Each single dish is independently seated and removable from the carrier, its inbuilt perch makes it suitable for attachment to the inside of the door, on 12.7mm (1/2 inch) and 16mm (5/8 inch) punch bar breeding cage fronts. The Twinpot has been designed and manufactured in the robust Riversway style, and is available in our full colour range. £3.76 per feeding station.

Cage Front Seed Hopper. This new innovation has been designed and manufactured to the ongoing combination of high quality standard, robustness, hygiene friendly and practical, and can be attached to both 12.7mm (1/2 inch) and 16mm (5/8 inch) punch bar breeding cage fronts. Easy to assemble and clean, the seed reservoir offers instant visual assessment of seed levels, whilst dispensing its contents through the bars. The levels are replenished from outside of the cages, thus preventing contamination and fouling. Can be used in pairs (plain canary and mixed millets for example). The Hoppers contain up to ten days of seed supplied to the cage per pair. Hopper set (set includes 1 x lid, 1 x tube & 1 x base, as picture) only £3.76 each with free UK P&P. Only one Hopper sent per £3.76. Fitting instructions can be found HERE

Round Drinker. A high quality drinker introduced to satisfy the needs of the fancies. Design modifications include internal and external rounded corners to allow easy cleaning, a wider finger from which the bird drinks in water from a high level, a 20% increase in volume compared to most drinkers, flat top and bottom for easy standing, and tapered seating of reservoir into base to prevent leakage. Reservoirs are produced in a range of colours to satisfy individual preferences and include clear, grey smoked and tinted in the full range of colours. (excluding white) To suit the bases (16mm, 5/8 inch only). This superb and highly sought after product is only £1.80 per Drinker!

Perch Support. Designed primarily to remove the rusty nail and saw cut necessity, hence allowing a fixed length perch for individual birdrooms. When fitted, the rear by a single screw and then forward twisted through and located by the cage front vertical wires, the perch becomes stable and firm. All movement of the perch is eradicated allowing a firm base for breeding pairs (16mm, 5/8 inch only). this best selling Riversway product is available in both square and round cut perches. please specify when ordering. 'fronts' fit to the cage and 'rears' fit to the wall. Mixed are one of each. only £1.10 per set/pair!

Clip-On Soft Food Dish. Designed as a large capacity soft food dish to suit the needs of present day exhibition budgerigar breeding. All sharp and square corners have been eradicated enabling easy cleaning and no entrapment of stale food. The design facilitates easy and firm fixing to the cage front, reducing spillage through vibration. Also in increasing use as a mineral and grit dish because of its stability when attached to the cage front. Both 12.7mm (1/2 inch) and 16mm (5/8 inch). only 90p each!

Riversway Spares. For all your spare tubes, twinpots, drinker bases, hopper lids/bases. Please order you request using the drop down box to the right, and remember that there is free postage on all Riversway own products to the UK!

Slimline Drinker. The Riversway Slimline Drinker is designed and distributed solely by Riversway Aviculture Products Ltd, don't accept anything but the best for your birds! Self clipping to 12.7mm and 16mm punch bar, a superb Drinker that is a 1st to the aviculture world. The drinker channels are offset to the left or right and combined with a revolutionary slimline design that gives the Budgerigar breeder an option to maximize his cage front area, allowing for an improved viewing area of his birds. As with every Riversway product only the highest standard of materials are used. No coatings are used to give the effect of colour tinting, actual coloured materials are used, ensuring a robust and long lasting finish. Further information HERE. Standard size £1.60 and small size £1.00 each.